Acterna l Trilithic l Sadelco l B&K l Leader l Promax l TV Explorer l Prolink l Wavetek Home   
  WAVETEK
 

Wavetek 3SRV Stealth Analyzer
Wavetek 3SR/T Stealth Analyzer
Wavetek 3ST Stealth Sweep Transmitter
Wavetek 3SR Stealth Sweep Receiver
Wavetek 3HRV System Status Monitor
Wavetek 3SM Stealth Swep Monitor
Wavetek SBC-6 Stealth Battery Chargere

 
 

3SRT

Highlights:

  • Continuously referenced, non-interfering sweep frequency response measurement
  • Extremely fast sweep update
  • Receiver is also high-powered SAM
  • Hum and carrier to noise tests on modulated carriers
  • High resolution LCD spectrum display
  • Performs essential cable TV system preventive maintenance tests with accuracy and ease
  • Signal levels, hum, C/N, and frequency response can be quickly tested without subscriber interference
  • Frequency response is tested by injecting a low level signal in vacant spectrum areas, and monitoring cable system carrier levels in occupied spectrum areas
  • In addition to generating the sweep test signal, the Stealth Transmitter 3ST continuously monitors the system carriers
  • While monitoring these carriers, the 3ST immediately sends any headend level variations to the Stealth Receiver 3SR
  • Stealth Receiver, 3SR, in addition to performing its sweep reception duties, conducts a battery of signal level measurements, including a full scan of the cable spectrum to 1 GHz

Specifications

  • Frequency
    * Range: 5 to 1,000 MHz
    * Resolution Bandwidths: 30, 280, and 1,000 kHz
    * Tuning Resolutions: 10 kHz
  • Level Measurement
    * Range: -45 to +60 dBmV
    * Resolution: 0.1 dB
  • Hum Measurement (carrier ≥ -5 dBmV)
    * Range: 0 to 10%
    * Resolution: < 0.2%
  • Carrier to Noise Measurement (carrier≥ 20 dBmV)
    * Range: -20 to -55 dBc
    * Resolution: 0.5 dB
  • Frequency Response
    * Sweep Rate: approx 1 second (5 ms per data point + 100 ms telemetry)
    * Display Scaling & Range: 0.5, 1, 2, 5 and 10 dB/division; 6 vertical divisions
    * Sweep Scan: User definable from 5 to 1,000 MHz
    * Reference Storage: At least 8
    * Sweep Trace Storage: At least 50
  • Transmitter
    * Frequency Range: 5 to 1,000 MHz
    * Level Range: +10 to +40 dBmV; settable in 2 dB increments
  • Telemetry
    * Frequency: User defined, any frequency within tunable range
    * Modulation: FSK, 100 kHz deviation
  • Printer Interface: Serial, RS232, IBM, & HP Laserjet
  • Powering - Battery Life: 2 hours continuous (absolute worst case), replaceable battery cartridge
 

Copyright © 2008 CATVMETERS.com All Rights Reserved. Designated trademarks and brands are the property of their respective owners.