Acterna l Trilithic l Sadelco l B&K l Leader l Promax l TV Explorer l Prolink l Wavetek Home   
  SADELCO
 

DisplayMax
DisplayMax 800 Frequency: 5-872 MHz
DisplayMax 800CLI Frequency: 5-872 MHz
DisplayMax 5000
DisplayMax 600CLI

DisplayMax Jr.
DisplayMax Jr. 1000 Frequency: 47-600 MHz
DisplayMax Jr. 1500 Frequency: 47-872 MHz
DisplayMax Jr. 2000 Frequency: 5-872 MHz
DisplayMax Jr. 2500 Frequency: 5-872 MHz
DisplayMax Jr. 3000 Frequency: 5-872 MHz

MiniMax
MiniMax 800
MiniMax 600
MiniMax M800

 
 

3000 Frequency

The DisplayMax Jr 3000 is a rugged, easy to use signal level meter capable of measuring analog and digital channels at any point in the CATV system from the headend to the subscriber drop. In addition to signal level, the Jr 3000 detects both leakage and ingress at the subscriber drop and home wiring. Finding and fi xing leakage and ingress is essential to maintaining VoIP and High-Speed Data services. The fi rst step is to test for ingress coming from the customer’s premise. If ingress is detected, use the leakage mode to quickly fi nd the source. Routine testing for leakage and ingress, in addition to verifying analog and digital channel level, will insure the most demanding services run smoothly.

Highlights:

  • VoIP & HSD Qualifi er Insure that ingress will not interfere with VoIP and High-Speed Data services
  • Leakage & Ingress Detection Find and fi x leakage and ingress problems at the subsciber’s drop and home wiring
  • Analog & Digital Power Verify proper levels of analog and digital channels from the headend to the TV.
  • Auto-Calibration Eliminate the cost and downtime of annual calibration

Specification

  • SIGNAL LEVEL METER Frequency Range: 5 to 872 MHz. Tuning Resolution: 125 KHz. IF Bandwidth: 280 KHz. Analog Power Range: -30 to +60 dBmV. Digital Power Range: -23 to +67 dBmV. Level Resolution: 0.1 dB
  • Typical Accuracy: +/- 0.5 dB Max Additional Error at 70° F: +/- 0.5 dB Typical Accuracy from 0 to 120° F: +/- 1.0 dB Max Additional Error from 0 to 120° F: +/- 1.0 dB Digital Error: additional +/- 0.5 dB dB
  • LEAKAGE DETECTOR Frequency Range: 110 to 140 MHz. (default 133.250 MHz.)
  • Sensitivity: 2 uV/m, with duck antenna 3ft from leak Tuning Resolution: 125 KHz. IF Bandwidth: 280 KHz. Detector Type: Peak Video Filter: Responds only to video signals (rejects non-cable signals) Audio: Outputs tone; frequency varies with level. Accuracy: Same as analog channels in signal level meter mode
  • INGRESS DETECTOR Frequency Range: 5 to 872 MHz. (default 5 to 40 MHz.)
  • Return Sensitivity: -40 dBmV. (5 to 40 MHz.) Forward Sensitivity: -30 dBmV. (40 to 872 MHz) Tuning Resolution: 250 KHz. IF Bandwidth: 280 KHz. Detector Type: Peak Accuracy: Same as digital channels in signal level meter mode
  • GENERAL Battery life: 4 hours Fast Charge: 2 hours 80%, 4 hours 100% Audio: Water sealed speaker with volume control Weight and Dimensions: 2.2 lbs, L 7.5” x W 3.5” x D 2.2” Supplied Accessories: Nylon case (CASE006), 110V wall charger (T70), duck antenna (ANT01), Ni-MH battery (BAT08), manual Optional Accessories: Car charger (CH04), 220V wall charger, (T70E), dipole antenna (ANT02), monopole antenna (ANT03)

 

Copyright © 2008 CATVMETERS.com All Rights Reserved. Designated trademarks and brands are the property of their respective owners.